Details
|
|
The SMPS24-2.5 is a fully regulated adjustable output voltage power supply. The output voltage is normally preset at the factory. Please consult Customer Services for your voltage requirements when ordering.
|
|
Note: |
There are no user serviceable parts inside the power supply and it is extremely dangerous to remove the cover while the unit is switched on, as live circuitry inside may be exposed.
|
Stock Code
|
Description
|
Output Voltage
|
Current
|
912.039.00
|
SMPS 24-2.5
|
22-29V
|
2.5A
|
Specifications | |
Nominal Output Voltage | 27.6V DC |
Output Ripple Voltage @ Full Load | < 0.1% |
Load Regulation (Zero to Full Load) | < 2.0% |
Line Regulation (220-240V) @ Full load | < 0.1% |
Output Voltage Adjustable Range | 22-29V DC |
Output Current Continuous | 2.5A Max |
Electronic Circuit Current Limit | 2.5A DC (adjustable to 4A max for peak loads at 12- 28V DC) |
Output Power Continuous | 70W Max |
Frequency of Operation | 100kHz |
Input Fuse | 2A Slow Blow 250V AC internally accessible |
Thermal Protection | Internal protection circuitry on board |
Voltage limit indication | Green LED |
Current limit Indication | Red LED |
RFI Suppression | AS/NZS 2064 Class A |
Dimensions | L - 200mm W - 125mm H - 77mm |
Mains Input | Nominal 230/240V AC 50/60Hz |
Mains Input Range | 200-260V AC 50/60Hz (110/115 V AC Operation possible) |
Weight | 1.4 Kg |
The power supply is factory preset at the customer specified output voltage between 11 and 14.5V DC (usually 13.8V DC).
|
|
Mains input is via a 3-pin plug and flex; output studs for + and - connections are provided outside the case. A 12V female cigarette output socket is also supplied on the front panel.
|
Installation
|
The power supply should be installed in a well ventilated area and not enclosed where excessive heat build up can occur. Do not install or mount above any hot air discharge/air-conditioner/radiator or similar equipment. Mounting outside or in a wet/damp environment is also not recommended.
|
Batteries
|
Sealed and open lead acid batteries can be charged. Please specify nominal output float voltage and size of battery when ordering.
|