Power Supply - SPS60W



The SPS60W is a fully adjustable output voltage power supply. The output voltage is normally preset at the factory, although it can easily be altered in the field. If this is done it is best to alter the output voltage under load.
Stock Code
Output Voltage
3A max
Output Ripple Voltage @ Full Load < 0.1%
Load Regulation (Zero to Full Load) < 2.0%
Line Regulation (220-240V) @ Full load < 0.1%
Output Regulation Typically 1.5%
Output Voltage Range 1 - 30V DC (Adjustable)
Output Current Voltage dependent - see graph below
Electronic Circuit Current Limit 5.5 - 6A DC
Output Power (Max) 60W
Dimensions L - 160mm W - 109mm H - 65mm
Weight 2.26 Kg
The power supply is factory preset at the customer specified output voltage (between 1 and 30V DC). To determine the maximum current at any voltage for a continuous rating, refer to the graph below.
Current Rating Vs Voltage Graph
1V to 20V DC current max is 3A.
25V DC current max is 2.4A
Mains input is via a 3-pin plug and flex; output terminal blocks are provided outside the case.