|
|
Details
|
|
The PSR12-5 output voltage is preset at the factory to the user's requirements, this unit can be set to 13.8V for battery charging.
|
|
Stock Code
|
Description
|
Output Voltage
|
Current
|
|
912.020.00
|
PSR 12-5
|
12V or 13.8V |
5A |
| Specifications | |
| Output Ripple Voltage @ Full Load | < 0.1% |
| Load Regulation (Zero to Full Load) | < 1.0% |
| Line Regulation (220-240V) @ Full load | < 0.2% |
| Output Current Continuous | 5A Max |
| Electronic Circuit Current Limit | Approx 8A DC |
| Output Power | 70W Max |
| Frequency of Operation | 50/60kHz |
| Input/Output Fuse | Not supplied |
| Thermal Protection | Internal protection circuitry on board |
| Mains Input Nominal | 230V AC 50Hz |
| Dimensions | L - 200mm W - 125mm H - 77mm |
| Weight | 2.86 Kg |
|
Installation
|
|
The power supply should be installed in a well ventilated area and not enclosed where excessive heat build up can occur. Do not install or mount above any hot air discharge/air-conditioner/radiator or similar equipment. Mounting outside or in a wet/damp environment is also not permissible.
|
|
Connections
|
|
Mains input is via a 3-pin plug and flex; output terminals for + and - connections are provided outside the case.
|