Switchmode Power Supply 40W With Battery Charger

picture

 

                                                   

Details
The IS40W-13.8 is a fully regulated output voltage power supply. The output voltage is normally preset at the factory. Please consult Customer Services for your voltage requirements when ordering.
 
Note: Universal AC input/ full range, With Approvals of UL, ETS/EMC/CE
 
Stock Code
Description
DC Output Voltage
Current
 Efficiency 
897.084.30
IS 40W-13.8B
13.8V
2.9A
70%
 
Specifications
AC Input Voltage Range 85-264VAC (120~370VDC)
Input Frequency 47~63Hz
Inrush Current Cold Start, 20A/115V, 40A/230V
Load Regulation <0.5%
Line Regulation (Full load)  < ±0.5%
Output Voltage Adjustable Range V1: ±5% of rated output voltage
Output Over Voltage Protection 115~150%
Output Over Load Protection 110~150%
Withstand Voltage I/P-O/P: 3.0KVAC/1min
  I/P-F/G: 1.5KVAC/1min
  O/P-F/G: 0.5KVAC/1min
Rise, Hold Up Time 50ms, 20ms @ Full Load (Tipical)
Operating Temperature & Humidity -10ºC~+50ºC, 20~93%RH (Non Condensing)
Safety Standards Meet UL60950, EN60950
EMC Standards Meet EN55022 Class B, EN55024, EN61000-3-2,3
  EN61000-4-2,3,4,5,6,8,11
Cooling Method Convection
Dimensions 129x98x40(mm)
Weight 0.3kg
The power supply is factory preset at the customer specified output voltage.
 
 
Installation
The power supply should be installed in a well ventilated area and not enclosed where excessive heat build up can occur. Do not install or mount above any hot air discharge/air-conditioner/radiator or similar equipment. Mounting outside or in a wet/damp environment is also not recommended. Keep fan intake/output vents well clear of any material likely to block them.
 
Batteries
Sealed and open lead acid batteries can be charged. Please specify nominal output float voltage and size of battery when ordering.